Pressure Transmitter
HOME > Products Index > Pressure Transmitter > VSST(SF/RR/WT/WF)

Pressure TransmitterPFA type Pressure Transmitter

VSST(SF/RR/WT/WF) series

 *Available digital panel meters
   >>Click here for the list.

Suitable for pressure measurement of ultrapure water and corrosive media such as strong acids or alkalis.
Integrally molded PFA body offers high leak-proof performance.
Employs a leak indicator to alert you in case gas permeation occurs.

Measured medium Ultrapure water, strong acid, strong alkali or other media that will not corrode PFA.
Pressure type Positive, compound and negative pressures can be measured.
Measured Range Rated capacity : 0(-0.1)~0.4, 0.6, 1MPa
Specify more than 60% of rated capacity as the calibration range(F.S.).
  Rated capacity : In the case of 0.4MPa
  0~0.2MPa (=0.2MPaF.S.)
       → Manufacture is impossible.
  -0.1~0.2MPa (=0.3MPaF.S.)
       → Manufacture is possible.
Output type Specify among 4 to 20 mA (2 wire system), 1 to 5 V, 0 to 5 V, 0 to 10 V.


Accuracy ±1%R.C.(25°C)(Non Linearity, Hysteresis, Repeatability included)
Gas Permeability Detection Leak indicator lamp changes from yellow to red when the medium is
acidic, and from yellow to blue if alkaline.
Exchange time: Becomes red or blue
Compensated Temperature Range
(Temperature of medium to be measured)
15~40°C(No condensation or freezing)
Safe Temperature Range
(Temperature of medium to be measured)
0~80°C(No condensation or freezing)
Temperature Effect ±0.5%R.C.(15~40°C)
Safe Overload Rating 0.4→0.6MPa, 0.6→0.9MPa, 1→1.25MPa
Pressure Port Material PFA fluoroplastic
Housing Material PP (Polypropylene)
Leakage 3×10-8Pa・m³/sec. or less
Sealing Seal-less due to integral molding
Screw type 1/4, 3/8, 1/2, 3/4Tube, Flared, Screw-in
Cable PVC coated 4-core (current type is 2-core) shielded
3m pigtail(UL-compliant)
IP Rating Equivalent to IP55
Weight Approx. 360g(Cable 3m included)
Accessories Operation manual (1 copy)(Specify English or Japanese.)
Test report (1 copy)

Model Selection

Model Selection
Selection Check Model Specification
1.Model   VSST Single feed port/Tube type
  VSSF Single feed port/Flare groove joint type
  VSRR Single feed port/Screw type
  VSWT Double feed port/Tube type
  VSWF Double feed port/Flare groove joint type
2.Connection screw   1 1/4(Not available for screw-in type)
  2 3/8
  3 1/2(Not available for screw-in type)
  4 3/4(For double feed port type only)
3.Analog output - - Output type Response frequency Safe load resistance Consumption current
  A2 1~5V(3 wire system) 50Hz 100kΩ or more Approx. 10mA
  A4 0~5V(3 wire system)
  A5 0~10V(3 wire system)
  A6 4~20mA(2 wire system) 500Ω or less -
4.Calibration - - Rated capacity Example of calibration range
  See right table. Enter the range in the   as it is. 0.4MPa 0.4MPa
0.6MPa 0.6MPa
1MPa 1MPa
5.Cable Connection S Pigtail Equivalent to IP55
6.Length(Cable)   01 1m
  02 2m
  02 3m Standard
  □□ 4~99m *Specify required length in meters.
7.Rated Capacity   004 0.4MPa
  006 0.6MPa
  010 1MPa
8.Power   4 DC24V(Currente output only)
  6 DC15~24V(Voltage output only)
9.Data   N Test report (3-point measurement)/(Standard)
  T Traceability documents
*Breakdown of traceability documents
1:Traceability certificate
2:Traceability system diagram
3:Test report (3-point measurement)

Learn more about external dimensions.