Specialized manufacturer of Digital Pressure Meters and Load Cells

VALCOM CO.,LTD.

 

φ81 Intelligent type Round Digital Pressure Meter
VSMC series
0.5MPa–100MPa


* Actual products may differ from photo depending on specifications.

  • 2 setting outputs + 4 to 20 mA(with analog output scaling function)
  • Multifunctional type with a built-in microcomputer.
  • AC power: AC 90 to 240 V
  • Zero shift, tracking zero adjustment, loop check and moving average are included as standard.
Measured medium Air, gases, water, oil or other media that will not corrode 15-5PH (precipitation-hardened stainless steel).
Pressure type Positive pressures can be measured.
Pressure range Pressure sensor series for medium-to-high pressure up to 100 MPa are available. (See photos on the left for pressure sensors.)

Specifications

Display 4 digit Red LED (Character height: 14.2mm)
Measurement and Indication Range Measures with 5000 display resolution for the input of 1.000mV/V. Display (calibration) range to be specified by model.
(Display scaling value: max.5000)
Indication Accuracy ±0.1%F.S.±1digit (at 23±5°C)
*Total accuracy depends on the specifications of sensor.
Sampling speed 1–500 times/sec. Modifiable
Indication Conversion Rate 1–25 times/sec. Modifiable
Setting Operation Number of Output Channels 2 point (Values can be set as desired.)
Hi setting: Measured value ≥ Setting value = Output ON
Comparison Condition Low setting: Measured value ≤ Setting value = Output ON
(Hi or Low can be set for 2 points respectively.)
Comparison Setting Range −5000–5000
Differential Setting Range 0–999
Comparison Cycle Synchronized with the sampling rate
Response delay≒ (1 / Sampling rate)×(Moving average) [sec]
Contact rating PhotoMOS relay output AC/DC
Load voltage:240V, Load current:120mA or less
Analog output Setting Operation 4–20mA (Output range can be set as desired.)
Output Accuracy ±0.2%F.S. for the display of 0–1000
(±2 digits for the display scaling value)
Safe load resistance 500Ω or less
Use Temperature Range 0–50°C(No freezing)
Use Humidity Range 35–85%RH(No condensation)
IP Rating Equivalent to IP65
Power [Power Consumption] 4DC24V±10% [4W or less]
7AC90–240V (Free) [6VA or less]
Functions Zero shift function, Tracking zero function, Moving average setting function,
Loop check function, Overrange warning (Blinks at the limit values of measurement.) etc
Material Body ring cover: Aluminum die-casting
Front panel: Aluminium material
(Top sheet: Polyester film)
Weight Approx. 500g (Cable not included)
Accessories Operating manual 1 copy (Specify English or Japanese.)
Test report 1 copy
Power and output connectors: 1 each (*1)

Model Selection

Example

Selection Check Model Specifications
1.Model VSMC φ81 2 setting output/4–20mA output included Round Digital Pressure Meter
2.Casing type AS Sensor directly connected on bottom, Flangeless
3.Analog output 3 4–20mA
4.Number of Setting Outputs 2P 2-point photoMOS relay a contact output
5.Power   4 DC24V
  7 AC90–240V (Free)
6.Calibration     Specify the range within the rated capacity of the applicable pressure sensor.(Within 50% of the rated capacity)
*Refer to Selection Table for Pressure Sensors for the rated capacity.
7.Cable Connection W Waterproof connector
8.Sensor type   T VPRT or VPRTF Refer to "Selection Table" for details.
  Q VPRQ or VPRQF
  F VPRF
9.Rated Capacity(R.C.)   001MPG 1MPa
  002MPG 2MPa
  005MPG 5MPa
  010MPG 10MPa
  020MPG 20MPa
  035MPG 35MPa *Sensor Q type only
  050MPG 50MPa
  100MPG 100MPa *Sensor T/Q type only
10.Connection
*Available thread size
varies with the sensor.
  R3 R3/8 (Target model: VPRT/VPRQ)
  G3 G3/8 (Target model: VPRTF/VPRQF/VPRF)
  R4 R1/2 (Target model: VPRT-100MP)
  G4 G1/2 (Target model: VPRTF-100MP/VPRQF-100MP)

External dimensions (Unit: mm)

External dimensions
Selection table for pressure sensor
Pressure sensor VPRF VPRT VPRTF VPRT VPRTF
Connection screw G3/8 R3/8 G3/8 R1/2 G1/2
Rated capacity 1–50MPa 1–50MPa 100MPa
Drawing
Pressure sensor VPRQ VPRQF VPRQF
Connection screw R3/8 G3/8 G1/2
Rated capacity 1–50MPa 100MPa
Drawing

1–35MPa

50MPa

100MPa

Terminal connection diagram

Terminal connection diagram

Membership is required to use the download service.
If you have already finished registration, log in from here.

■ E-mail address
■ Password

If not yet, click here to register for membership.