Search by model
Search resultMatches found: 217
VWM6AStrain Gauge Panel Meter for Scaling [Strain Gauge Input]
Display: Display resoulution ±999999 (Recommended 10,000 or less) LCD
Input signal: Strain gauge ±7mV/V
Use: Weigh measurement of Carbonic acid gas cylinder in Water purification facilities.
SIze: 192(W) x 96(H) x 87(D) mm
Output: [Alarm setting] Option Photo Mos relay 3 points, [Analog] Option 4 to 20mA, [Other] Option RS-232C, RS-422/RS-485
Easy-to-view large display of 25mm in character hight.
Can be used by AC adapter and AAA alkaline cells.
There is two comparator functions, [HL mode] and [5 step sorting mode]. It is compared to measured mass value and set mass value, it can display the results or have a notice by buzzer.
VWM30RCompact Strain Gauge Module with RS-485 (Modbus RTU) Interface
Display: -99999 to 99999 (5 digits) or -999999 to 999999 (6 digits) Red LED
Input signal: Strain gauge ±7mV/V
Use: Conveyor weight checker.
SIze: 35(W) x 110(H) x 101(D) mm
DIN rail mounting type suitable for installing into control box
Flow rate calculation function included
High-performance dual digital filter included
VWM8C[Only for CC-Link] Strain Gauge Color Panel Meter for Scaling [Strain Gauge Input]
Display: Display resoulution ±999999 (Recommended 20,000 or less)
Input signal: Strain gauge ±7mV/V
Use: Weigh measurement of Sludge tanks. Measuring liquid level of Open tanks.
Size: 144(W) x 72(H) x 135(D) mm (Including screw terminal)
Can be connected to CC-Link directly. (CC-Link interface included as standard.)
Simplified design with focus on connection with PLC.
High speed (100 times/second) and high accuracy.
VPMC (with Analog output)Bourdon-replaceable Round Digital(Pressure/Load) Meter with Analog Output [Strain Gauge Input]
Display: ±1999 3 1/2-digits High brightness red LED (character height of approx. 15mm)
Input signal: Strain gauge or Semiconductor strain gauge (Calibrated as a pair)
Size: φ98 x 74 mm (D: Protrusions not included)
Output: [Analog] 1mV/digit, 0 to 5V, 1 to 5V, 0 to 10V, 4 to 20mA
Abundant analog output available.(4 to 20 mA, 1 to 5 V, 0 to 5 V, 0 to 10 V, etc.)
Easy-to-view large display of 3 1/2-digit, approx. 15 mm in character height.
VPMC and sensor are calibrated as a pair, including the sensor cable length, and constitute a high-accuracy digital pressure meter.
VPMC (with Comparison setting output)Bourdon-replaceable Round Digital(Pressure/Load) Meter with 1 Comparison Setting Output [Strain Gauge Input]
Display: ±1999 3 1/2-digits High brightness red LED (character height of approx. 15mm)
Input signal: Strain gauge or Semiconductor strain gauge (Calibrated as a pair)
Size: φ98 x 74 mm (D: Protrusions not included)
Output: [Alarm setting] 1-setting / PhotoMOS relay output (H/L specification)
One comparative setting output included as standard.
Easy-to-view large display of 3 1/2-digit, approx. 15 mm in character height.
VPMC and sensor are calibrated as a pair, including the sensor cable length, and constitute a high-accuracy digital pressure meter.
VPC (with Analog/BCD output)Analog/BCD Output type Amplifier with Round Digital(Pressure/Load) Display [Strain Gauge Input]
Display: ±1999 3 1/2-digits High brightness red LED (character height of approx. 15mm)
Input signal: Strain gauge or Semiconductor strain gauge (Calibrated as a pair)
Size: φ104 x 56 mm (D: Protrusions not included)
Output: [Analog] 1mV/digit, 0 to 5V, 1 to 5V, 0 to 10V, 4 to 20mA, [Other] BCD TTL (Positive/Negative), BCD open-collector (Positive/Negative)
5 analog outputs and 3 BCD outputs can be selected and used together.
VPC and sensor are calibrated as a pair, including the sensor cable length, and constitute a high-accuracy digital pressure meter.
Fast response analog output without microcomputer is available that is suitable to fluid pressure measurement.
VPC (with Comparison setting output)Setting Output type Amplifier with Round Digital (Pressure/Load) Display [Strain Gauge Input]
Display: ±1999 3 1/2-digits High brightness red LED (character height of approx. 15mm)
Input signal: Strain gauge or Semiconductor strain gauge (Calibrated as a pair)
Size: φ104 x 56 mm (D: Protrusions not included)
Output: [Alarm setting] 2-setting / Relay output or PhotoMOS relay output (H/L specification)
High-speed analog comparator function included.
Output can be selected between relay and photo-MOS relay.
HI or LO comparative setting output can be selected.
VPRH-U/VPRV-UDIN48×96 Square type Digital(Pressure/Load) Meter [Strain Gauge Input]
Display: ±1999 3 1/2-digit, 999 3 digit (vertical type) Red-color LED (character height 15mm)
Input signal: Strain gauge or Semiconductor strain gauge (Calibrated as a pair)
Size: Vertical:48(W) x 96(H) x 127(D) mm (D: Protrusions not included), Horizontal:96(W) x 48(H) x 127(D) mm (D: Protrusions not included)
Output: [Alarm setting] 2-setting / Relay output or PhotoMOS relay output (H/L specification), [Analog] 1mV/digit, 0 to 5V, 1 to 5V, 0 to 10V, 4 to 20mA
Comparative setting outputs can be selected between relay and photo-MOS relay.
Horizontal type (3 1/2-digits) and vertical type (3 digits) are available in DIN sizes.
5 analog outputs can be selected.
VPS (Analog/BCD setting output)Analog, BCD Output/Setting Output type Digital(Pressure/Load) Meter [Strain Gauge Input]
Display: 1999 3 1/2-digits High brightness red LED (character height of approx. 15mm)
Input signal: Strain gauge or Semiconductor strain gauge (Calibrated as a pair)
Size: 96(W) x 96(H) x 139(D) mm (D: Protrusions not included), [Long case] 96(W) x 96(H) x 210(D) mm (D: Protrusions not included)
Output: [Alarm setting] 3-setting / Relay output or Open collector output or PhotoMOS relay output (H/L specification), [Analog] 1mV/digit, 0 to 5V, 1 to 5V, 0 to 10V, 4 to 20mA, [Other] BCD TTL (Positive/Negative), BCD open-collector (Positive/Negative)
5 analog outputs and 4 BCD outputs can be selected and used together.
Analog outputs are raw waveforms not via the digital circuit, and fast response.
High capacity relay (250 V AC, 4 A) for setting output.
VPS (Arithmetic function)Differential Pressure type DIN96 Square Digital(Pressure/Load) Meter [Strain Gauge Input]
Display: 1999 3 1/2-digits High brightness red LED (character height of approx. 15mm)
Input signal: Strain gauge or Semiconductor strain gauge (Calibrated as a pair)
Size: 96(W) x 96(H) x 139(D) mm (D: Protrusions not included), [Long case] 96(W) x 96(H) x 210(D) mm (D: Protrusions not included)
Output: [Alarm setting] 3-setting / Relay output or Open collector output or PhotoMOS relay output (H/L specification), [Analog] 1mV/digit, 0 to 5V, 1 to 5V, 0 to 10V, 4 to 20mA, [Other] BCD TTL (Positive/Negative), BCD open-collector (Positive/Negative)
Equalizing valve not required for differential pressure display.
Added and subtracted values can be read directly.
5 analog outputs and 4 BCD outputs can be selected and used together.
VPXMAmplifier with Square type (Pressure/Load) Display for Press, Injection and Bending [Strain Gauge Input]
Display: 1999 3 1/2-digit Super luminosity Red LED (Character height: approx.15mm)
Input signal: Strain gauge or Semiconductor strain gauge (Calibrated as a pair)
Use: Pass / Fail judgment such as press-fitting and caulking
Size: 96(W) x 96(H) x 139(D) mm (D: Protrusions not included), [Long case] 96(W) x 96(H) x 210(D) mm (D: Protrusions not included)
Output: [Alarm setting] 2-setting / Relay output or Open collector output (H/L specification), [Analog] 1mV/digit, 0 to 5V, 1 to 5V, 0 to 10V, 4 to 20mA, [Other] BCD TTL (Positive/Negative), BCD open-collector (Positive/Negative)
Compact and high-efficiency amplifier with digital display for Go/No-Go judgment of press work.
Specialized in press, press fitting and caulking with the dedicated measurement timing chart.
Abundant options to support OEM production.
AD105DDigital substrate for Strain guage [Strain Gauge Input]
Special interface (UART) RS/485 2wire type
Digital filtering and scaling of the measurement signal
Communication via ASCII command
Limit value switches with hysteresis
Indicate status of power supply
Power fail safe parameter strong
Parameter setting and measurement via panel program software
VPJAmplifier Module (for Pressure/Load) [Strain Gauge Input]
Selectable from among 4 analog outputs. [4 to 20mA, 1 to 5V, 0 to 5V, 0 to 10V]
Power and I/O lines are isolated from each other to enhance noise resistance.
Can be mounted on the base plate or via the DIN rail adapter
Digital pressure gauges and load meters Accessories
List of accessories (Manual, Test report, Bracket, Unit Sticker, Initial Setting List, Connector, Water-proof Packing, Short Bar)
Attached Connector
Digital pressure gauges and load meters Options
Options list (Acrylic Cover, Sold separately)
Exclusive use power for VPCPower Converter for VALCOM Products
Dedicated converter unit that converts AC current into DC current with no noises, and supplies it to the amplifiers with round digital display.
From single sensor connection to multiple sensor connection up to 15 units available.
Can be made to order according to your specification.
Power Converter（For VPC/VPS/VPJ）Dedicated converter unit
Dedicated converter unit that converts AC current into DC current with less noises, and supplies it to the amplifiers with round/square digital display.
From single sensor connection to multiple sensor connection up to 15 units available.
Can be made to order according to your specification.